3D Printing - What parts do you want?
Goto page Previous  1, 2, 3, 4  Next
 
   JZS147 Australia Forum Index -> Aristochat
View previous topic :: View next topic  
Author Message
Dazwaaah
'Mr. 60mm'


Joined: 21 Apr 2007
Posts: 4409
Location: pissing JayVee off somewhere

PostPosted: Mon Sep 03, 2012 6:52 pm    Post subject: Reply with quote

mate at work had the MJM 3d printer for a while... so made a lego army hahaha


_________________


Flutter Crew '08
Patch Crew '09
Contiki Crew '10
Back to top
View user's profile Send private message
bulldogger
'Keyboard Warrior'


Joined: 12 Jul 2010
Posts: 6577
Location: parramatta

PostPosted: Mon Sep 03, 2012 11:41 pm    Post subject: Reply with quote

hey was thinking even an single din stereo fasica that held a few guages in it
_________________
a real car has 3 pedals
aristo's,rx3 fj20t,urvan z18t,v6 sigma,starion's,la lancer 2.6t aka 4u2no,gc galants
vn/lexcen turbo ,202 six 1200 ute,gh sigma turbo's
escorts,et turbo's,rx7 s3 13b jay port,ta22 celica
Back to top
View user's profile Send private message Send e-mail MSN Messenger
bulldogger
'Keyboard Warrior'


Joined: 12 Jul 2010
Posts: 6577
Location: parramatta

PostPosted: Sat Jan 05, 2013 8:58 am    Post subject: Reply with quote

is this up and running yet Confused
_________________
a real car has 3 pedals
aristo's,rx3 fj20t,urvan z18t,v6 sigma,starion's,la lancer 2.6t aka 4u2no,gc galants
vn/lexcen turbo ,202 six 1200 ute,gh sigma turbo's
escorts,et turbo's,rx7 s3 13b jay port,ta22 celica
Back to top
View user's profile Send private message Send e-mail MSN Messenger
Aristoman
Site Admin


Joined: 13 Apr 2007
Posts: 14079
Location: Perth

PostPosted: Sat Jan 05, 2013 12:37 pm    Post subject: Reply with quote

bulldogger wrote:
is this up and running yet Confused


Suprised if this goes ahead Very Happy
_________________
WA's Most Powerful 6spd Aristo Burnout
The Aristo Spare Parts Man Very Happy
Back to top
View user's profile Send private message Visit poster's website
Chappo
'Ex Aristo Owner'


Joined: 30 Apr 2007
Posts: 4813
Location: Perth

PostPosted: Sat Jan 05, 2013 1:03 pm    Post subject: Reply with quote

Not quite. Waiting for a controller board to be in stock.
Back to top
View user's profile Send private message Send e-mail
Aristoman
Site Admin


Joined: 13 Apr 2007
Posts: 14079
Location: Perth

PostPosted: Sat Jan 05, 2013 1:37 pm    Post subject: Reply with quote

Chappo wrote:
Not quite. Waiting for a controller board to be in stock.


So 50/50 Very Happy
_________________
WA's Most Powerful 6spd Aristo Burnout
The Aristo Spare Parts Man Very Happy
Back to top
View user's profile Send private message Visit poster's website
bulldogger
'Keyboard Warrior'


Joined: 12 Jul 2010
Posts: 6577
Location: parramatta

PostPosted: Sat Jan 05, 2013 1:53 pm    Post subject: Reply with quote

cool....when ready let us know i send you the rear license plate garnish's to copy
_________________
a real car has 3 pedals
aristo's,rx3 fj20t,urvan z18t,v6 sigma,starion's,la lancer 2.6t aka 4u2no,gc galants
vn/lexcen turbo ,202 six 1200 ute,gh sigma turbo's
escorts,et turbo's,rx7 s3 13b jay port,ta22 celica
Back to top
View user's profile Send private message Send e-mail MSN Messenger
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Sun Jun 15, 2014 6:58 pm    Post subject: Reply with quote

hows ya printer going? i got myself a 3d printer a couple weeks ago!

its basically a rip off of the makerbot replicator 2. CTC, using sailfish 7.6, Good lil thing, using makerware, replicator G, skeinforge, python, blender and freecad...

massive learning curve, this whole G code thing has got me perplexed tho...
replicator G is a lil confusing too, esp in conjunction with python....just confusing...

makerware is nice n easy tho! i like it!
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
greddygs3.
JZS147 Noobie


Joined: 05 Oct 2008
Posts: 9
Location: Vancouver, B.C

PostPosted: Mon Mar 23, 2015 5:08 am    Post subject: Reply with quote

To good to be true?
Back to top
View user's profile Send private message
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Mon Mar 23, 2015 11:31 am    Post subject: Reply with quote

wats too good to be true??? I've printed quite a few things for the aristo now!
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Mon Apr 06, 2015 3:26 pm    Post subject: Reply with quote

Wat are people interested in??

ive printed firewall seal clips, and throttle cable clips (the ones that clip to the strut brace)
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
DVS2JZ
'JZS147'


Joined: 12 Jun 2010
Posts: 862
Location: ManDurAH

PostPosted: Sat Apr 11, 2015 11:24 pm    Post subject: Reply with quote

Any pictures of the clips your able to reproduce? don't think i'v ever seen an aristo that has had the throttle cables cable tied to the strut bar
Back to top
View user's profile Send private message Send e-mail
sank
JZS147 Junior


Joined: 31 Aug 2012
Posts: 159
Location: Sydney, NSW

PostPosted: Sun Apr 12, 2015 12:37 am    Post subject: Reply with quote

What sort of sizes can you print up to?

Would something say, gauge pod sized be too big? 240mm x 110mm x 80mm

Back to top
View user's profile Send private message
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Sun Apr 12, 2015 9:28 pm    Post subject: Reply with quote

ill get some more clips going, the ones in the car are holding up well!

yea thats too large for my build platform, but, it wouldnt be hard to design a interlocking design so they would clip together, youd more than likely be painting it unit or something, so you could hide the join line somehow...if u left it as is off the build platform youd see the seam,

my build platform is 200w X 150d X 150h,

mine is a cheap version of a cheap version, so i dont know the actual limits of the build height, but itd be as simple as the height of the Z axis....which i cant remember the size of...can print anywhere from 300 micron, down to 100 micron, which is pretty dam thin...if i spent more time calibrating and setting up, might be able to get it down to the 80-90 micron range...but you have to remember, an item printed at 200 micron might take 5 hours...printing it @ 100 micron will make it take 10 hours.

Its not unusual for a build to take 20 hours to print...

i try and limit my prints to under 3-4 hours...havent printed many complicated things...
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Tue Sep 22, 2015 8:30 pm    Post subject: Reply with quote

So been a while since anybody has update this thread!!

I decided to re-do my stereo a bit, so i pulled the door pods out again, put some new speakers in the fronts, and i re-made my adapters, but i modelled them and printed out stock door pod to 4" speaker adapters.

I also decided to throw some new speakers in the mighty lil starlet, so i sound deadened the doors and rear quarters, and printed out door adapters for the speakers!!

4" is about the limit for one piece adapters, but can make larger ones, but they'll be 2 piece, combining the 2 pieces into one is easy and can still be sealed very easily!

my current project though, ive pulled my SAFC out of my centre console cig lighter/ashtray assy and am putting my afr gauge in there. will post photos as i progress!

ALSO printed out a MASSIVE dildo shifter for shits n giggles for the starlet!


_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Tue Sep 22, 2015 8:51 pm    Post subject: Reply with quote

so phones been having some issues these last couple days, so it doesnt want to connect to the pc, but ill get the pics over and up tomorrow!
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Fri Oct 09, 2015 11:42 pm    Post subject: Reply with quote

So this is my first revision, unfortunately, its too high to fit inside the enclosure, so its been scrapped, which sucks coz i love it!


so this is the 2nd rev, not the biggest fan of it, but it works and fits...


This is the final rev, and the final product! Printed in ABS and the surface lightly scuffed up to remove the gloss finish, which was uneven, and although this isnt completely smooth, or the most attractive, i really like it! i could vapor smooth it, but i like it.





will also be adding a tiny shroud on the left hand side.
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
2j inatux
JZS147 Junior


Joined: 06 Apr 2008
Posts: 161
Location: morley wa

PostPosted: Sat Dec 19, 2015 4:48 pm    Post subject: Reply with quote

could you fit 2 gauges in there??????? would be very interested Very Happy Very Happy
Back to top
View user's profile Send private message Send e-mail
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Sat Dec 19, 2015 8:22 pm    Post subject: Reply with quote

a 2nd would fit, the limitation would be the actual ashtray structure underneath, nothing a dremel cant fix though. i had to do a bit of dremeling to get the first gauge to fit...i then proceeded to burn myself quite badly hot gluing the fascia in...since u cant access the screws to attach the woodgrain, that also has to be hot glued in at one location (the other 1/2 locations can be accessed no worries)

i also printed a new lower for my starlet airbox so i can run the panel filter open!...used a 2 piece design that is interlocking.

build plate is actually 220, not 200.
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Sat Dec 19, 2015 11:18 pm    Post subject: Reply with quote





quick lil mash up
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    JZS147 Australia Forum Index -> Aristochat All times are GMT + 10 Hours
Goto page Previous  1, 2, 3, 4  Next
Page 2 of 4

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum









Faq   |   Search   |   Memberlist   |   Usergroups   |   Register   |   Profile   |   Log in

Powered by phpBB Copyright © phpBB Group, 2005. All Rights Reserved

Hosted by Fluffyduck Internet Services - Supraforums.com.au Partner