Posted: Tue Apr 30, 2013 10:49 pm Post subject: wheel bolt and nut
Does anyone know where I can buy wheel nut and bolts for mag wheels. I have a set of ssr Viennas and need to replace 2 bolts but if they are cheap will replace them all. So far no bolt shop can match them
Posted: Tue Apr 30, 2013 11:21 pm Post subject: Re: wheel bolt and nut
newbie wrote:
Does anyone know where I can buy wheel nut and bolts for mag wheels. I have a set of ssr Viennas and need to replace 2 bolts but if they are cheap will replace them all. So far no bolt shop can match them
SSR Japan sell them you gotta import them _________________
"The biggest failure you can have in life is making the mistake of never trying at all."
Joined: 22 Mar 2009 Posts: 260 Location: Newcastle
Posted: Thu May 02, 2013 9:40 am Post subject:
OGAristo wrote:
LewyTheFly wrote:
You mean wheel Studs?
Try repco or even a toyota dealer
As for wheel nuts man they are EVERYWHERE!
no he means the little bolts/nuts that SSR use to hold the 3 piece rims together that are on the actual rims
Ahh gotcha
Dude email this guy dartsun75@gmail.com his name is Jesse he is an Aussie living in Japland and he can be trusted and will hook you up!!!! _________________
i think he's meaning the bolts and nuts that hold the rim together like the 2/3 piece rims.....greeny might know he just done some rims _________________
a real car has 3 pedals
aristo's,rx3 fj20t,urvan z18t,v6 sigma,starion's,la lancer 2.6t aka 4u2no,gc galants
vn/lexcen turbo ,202 six 1200 ute,gh sigma turbo's
escorts,et turbo's,rx7 s3 13b jay port,ta22 celica
Yeah chasing the bolts that hold the centre rim piece onto the barrel. I have a wheel repair mob on the gold coast looking to see if they can match them currently, if I have no luck I will start chasing importers
The bolts are a stainless high tensile 8mm or Allen key top bolt not hard to find. In Sa we have place called "united fasteners" every nut and bolt under the sun. All ya do is take one out and take it to a place and they will match it up for you alot cheaper than going to a wheel repairer or manufacturer. And probably easier to find. I'm sure you guys have fastener places over there
The bolts are a stainless high tensile 8mm or Allen key top bolt not hard to find. In Sa we have place called "united fasteners" every nut and bolt under the sun. All ya do is take one out and take it to a place and they will match it up for you alot cheaper than going to a wheel repairer or manufacturer. And probably easier to find. I'm sure you guys have fastener places over there
have been to 4 nut and bolt/fastener speciality shops and 4 tyre/rim places all over Brisbane not one has had anything that matches
The bolts are a stainless high tensile 8mm or Allen key top bolt not hard to find. In Sa we have place called "united fasteners" every nut and bolt under the sun. All ya do is take one out and take it to a place and they will match it up for you alot cheaper than going to a wheel repairer or manufacturer. And probably easier to find. I'm sure you guys have fastener places over there
have been to 4 nut and bolt/fastener speciality shops and 4 tyre/rim places all over Brisbane not one has had anything that matches
JDM>ADM there not used to 3 piece rims lol good ol bob jane and their special 1 piece cast rims _________________
"The biggest failure you can have in life is making the mistake of never trying at all."
yes it does work/ssr/vip modular/rotiform all use their own bolts for their rims
What a load of crap. They just use standard off the shelf bolts. Although they are generally a hex head / 12 point bolt they will still be a standard bolt.
yes it does work/ssr/vip modular/rotiform all use their own bolts for their rims
What a load of crap. They just use standard off the shelf bolts. Although they are generally a hex head / 12 point bolt they will still be a standard bolt.
They are a 12 point M7 30mm long bolt.
you would be suprised even BBS use their own bolts _________________
"The biggest failure you can have in life is making the mistake of never trying at all."
you would be suprised even BBS use their own bolts
Sigh.. They use an M7 22mm bolt.
They are a standard bolt which you should be able to pick up at any decent fastener joint.
yes i know what your saying but ive pulled apart many 3 piece rims and to get new bolts/nuts i always went with the wheel maker ones are the fasteren joints where never able to match them up :/ _________________
"The biggest failure you can have in life is making the mistake of never trying at all."
yes it does work/ssr/vip modular/rotiform all use their own bolts for their rims
What a load of crap. They just use standard off the shelf bolts. Although they are generally a hex head / 12 point bolt they will still be a standard bolt.
They are a 12 point M7 30mm long bolt.
I think mine were an m8 definitely 12 point, the problem seems to be that the head size of the button is quite large. If ssr made their own I am sure they would sell them to me at a greatly inflated price of course.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum