yes it does work/ssr/vip modular/rotiform all use their own bolts for their rims
What a load of crap. They just use standard off the shelf bolts. Although they are generally a hex head / 12 point bolt they will still be a standard bolt.
They are a 12 point M7 30mm long bolt.
you would be suprised even BBS use their own bolts
The bolts are manufacturerd From various different Bolt and nut manufacturers around the World. In Japan you will find that most to all Brands SSR, Work, rays would use the Same manufactuer and more than likely they would be the same supplier that supplies the Car Factories. In Europe for BBS the same. They are not made in house specifically for those individual wheels.
yes it does work/ssr/vip modular/rotiform all use their own bolts for their rims
What a load of crap. They just use standard off the shelf bolts. Although they are generally a hex head / 12 point bolt they will still be a standard bolt.
They are a 12 point M7 30mm long bolt.
I think mine were an m8 definitely 12 point, the problem seems to be that the head size of the button is quite large. If ssr made their own I am sure they would sell them to me at a greatly inflated price of course.
yup i remember paying loads for mine a while back _________________
"The biggest failure you can have in life is making the mistake of never trying at all."
call simmons australia they have them _________________
a real car has 3 pedals
aristo's,rx3 fj20t,urvan z18t,v6 sigma,starion's,la lancer 2.6t aka 4u2no,gc galants
vn/lexcen turbo ,202 six 1200 ute,gh sigma turbo's
escorts,et turbo's,rx7 s3 13b jay port,ta22 celica
only other option is a machinist he can cut that thread _________________
a real car has 3 pedals
aristo's,rx3 fj20t,urvan z18t,v6 sigma,starion's,la lancer 2.6t aka 4u2no,gc galants
vn/lexcen turbo ,202 six 1200 ute,gh sigma turbo's
escorts,et turbo's,rx7 s3 13b jay port,ta22 celica
Joined: 22 Mar 2009 Posts: 260 Location: Newcastle
Posted: Sat May 04, 2013 9:15 am Post subject:
Hey bud if you are desperate I just remembered I had a few of these lying round from my old Work VS-KF's. I know they got a different head but if you want a couple let me know;
Hey bud if you are desperate I just remembered I had a few of these lying round from my old Work VS-KF's. I know they got a different head but if you want a couple let me know;
thanks mate, will let you know. I have a couple of other options. Going to look into how much to get them made and have been put into 2 other bolt shops which apparently carry more unique bolts
wat about shaft thickness? (which is quite important!) do they have any tensile ratings on them?
thickness is 5.5-6 mm. No tensile rating on them, I think they might be a chrome bolt by the look of the snapped one. Heard back from import monster they had no luck locating them either
Joined: 22 Apr 2007 Posts: 4010 Location: Perth, WA
Posted: Sun May 19, 2013 3:47 pm Post subject:
I had Jesse trying to chase some up for me too, exactly like those ^^ for my Trafficstars. Manufacturer refuses to sell them to private people, only "approved repairers" of which there are none outside of Japan (and maybe USA?).
I also chased around fastener places for them and could not find em. The guys at the fastener shops were always like "wow what is THAT from? that's such an odd size... and never seen anything like it before" could never help me.
So Chappo, if you know where I can get my hands on some, I'd be mighty appreciative!! _________________
1994 Black JZS147 Aristo - RIP. Went swimming
New 1992 Aristo Project
All times are GMT + 10 Hours Goto page Previous1, 2
Page 2 of 2
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum