Water temp sensor
Goto page 1, 2  Next
 
   JZS147 Australia Forum Index -> Aristochat
View previous topic :: View next topic  
Author Message
prolancaster
JZS147 Member


Joined: 08 Jan 2013
Posts: 292
Location: Zillmere, Queensland. Brisbane

PostPosted: Mon Apr 21, 2014 3:27 pm    Post subject: Water temp sensor Reply with quote

Don't know what to do. Was screwing my water temp sensor back in and it snapped clean in half. Sensor half is now stuck inside the threaded hole, so now I'm without a sensor.

Fuck my life
Back to top
View user's profile Send private message
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Mon Apr 21, 2014 3:57 pm    Post subject: Reply with quote

well, 2 options...

if its snapped in there, you can try and use a small screwdriver/pick/something, to try n grab an edge of the snapped sensor and unscrew it, they usually wont snap 100% clean, and normally you can grab a bit of the edge and rotate it out, alternatively, use a 40 thou (1mm) drill bit and drill a hole offset from the centre.

this will create an edge you can use to remove it...you can drill a 2nd hole in there and use 2 small screwies to get it out....or, last option....screw removers! drill a 3mm hole in the centre, then use a screw remover on a drill.

am assuming it got real tight before it snapped? if so, you probably wont be able to use the first methods and the only option is screw remover!
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
prolancaster
JZS147 Member


Joined: 08 Jan 2013
Posts: 292
Location: Zillmere, Queensland. Brisbane

PostPosted: Mon Apr 21, 2014 5:19 pm    Post subject: Reply with quote

Woggin wrote:
well, 2 options...

if its snapped in there, you can try and use a small screwdriver/pick/something, to try n grab an edge of the snapped sensor and unscrew it, they usually wont snap 100% clean, and normally you can grab a bit of the edge and rotate it out, alternatively, use a 40 thou (1mm) drill bit and drill a hole offset from the centre.

this will create an edge you can use to remove it...you can drill a 2nd hole in there and use 2 small screwies to get it out....or, last option....screw removers! drill a 3mm hole in the centre, then use a screw remover on a drill.

am assuming it got real tight before it snapped? if so, you probably wont be able to use the first methods and the only option is screw remover!


I think ill use the screw remover. Thanks!

Now I have to try and find a new sensor. Any ideas for that? Haha
Back to top
View user's profile Send private message
prolancaster
JZS147 Member


Joined: 08 Jan 2013
Posts: 292
Location: Zillmere, Queensland. Brisbane

PostPosted: Mon Apr 21, 2014 6:00 pm    Post subject: Reply with quote

Found the part number: 83420-aa010 or 83430-40020

Cant find any online from australia. Guess ill give toyota a ring tomorrow see if they have any in stock. I highly doubt they will Sad
Back to top
View user's profile Send private message
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Mon Apr 21, 2014 7:57 pm    Post subject: Reply with quote

ud be surprised wat they keep in stock, additionally, they dont change the resistance curve of the sensors.

a universal sensor would probably be very close the stock sensors curve.

is it the ecu or the dash sensor?
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
prolancaster
JZS147 Member


Joined: 08 Jan 2013
Posts: 292
Location: Zillmere, Queensland. Brisbane

PostPosted: Mon Apr 21, 2014 10:00 pm    Post subject: Reply with quote

So an oem one wouldnt be the go? Theres some online from other countries but no idea of theyd be suitable. Theyd fit, but yeah
Its the sensor for the dash gauge.
Back to top
View user's profile Send private message
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Tue Apr 22, 2014 10:35 am    Post subject: Reply with quote

i dont know where u got those part numbers from, i cant find them on toyodiy..

i got

89422 SENSOR, WATER TEMPERATURE (FOR E.F.I.)
89422-35010

but not sure if thats for the bottom of the rad or not..theres only one, so am thinking its the bottom rad one.
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Tue Apr 22, 2014 10:39 am    Post subject: Reply with quote

amayama says the aa010 is available from japan, plenty of stock...

can you link where you got ur p/n from please!
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
prolancaster
JZS147 Member


Joined: 08 Jan 2013
Posts: 292
Location: Zillmere, Queensland. Brisbane

PostPosted: Tue Apr 22, 2014 11:30 am    Post subject: Reply with quote

Woggin wrote:
amayama says the aa010 is available from japan, plenty of stock...

can you link where you got ur p/n from please!


I dont remember where I got the part numbers from haha. I searched the internet for an hour trying to find them. I think it was on supramania or something.
Back to top
View user's profile Send private message
prolancaster
JZS147 Member


Joined: 08 Jan 2013
Posts: 292
Location: Zillmere, Queensland. Brisbane

PostPosted: Tue Apr 22, 2014 11:33 am    Post subject: Reply with quote

This isnt the link i found it on, but it also confirms its the right part number

http://www.supraforums.com/forum/archive/index.php/t-685783.html?s=d0d1b654e74e200fcdd110e0e95d924d
Back to top
View user's profile Send private message
sank
JZS147 Junior


Joined: 31 Aug 2012
Posts: 159
Location: Sydney, NSW

PostPosted: Tue Apr 22, 2014 11:49 am    Post subject: Reply with quote

Maybe give Nick at North Shore Toyota an email as well? He's fantastic with part numbers and he could have it to you as quickly as somewhere like Amayama could. Generally cheaper than Aus Toyota as well.
Back to top
View user's profile Send private message
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Tue Apr 22, 2014 2:58 pm    Post subject: Reply with quote

i dont see jzs147-bepvz listed anywhere in that link, or 2jz, could be 1jz/1g/7m... (supramania isnt 2j specific)

i did a part number search on those 2 p/n you supplied in toyodiy, came up nothing and nothing, for an aristo anyways!

the aa010 brings up rav4/corona/celica and a couple others, the other isnt recognized at all!

id be very reluctant ordering either of those...
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
prolancaster
JZS147 Member


Joined: 08 Jan 2013
Posts: 292
Location: Zillmere, Queensland. Brisbane

PostPosted: Tue Apr 22, 2014 3:25 pm    Post subject: Reply with quote

Woggin wrote:
i dont see jzs147-bepvz listed anywhere in that link, or 2jz, could be 1jz/1g/7m... (supramania isnt 2j specific)

i did a part number search on those 2 p/n you supplied in toyodiy, came up nothing and nothing, for an aristo anyways!

the aa010 brings up rav4/corona/celica and a couple others, the other isnt recognized at all!

id be very reluctant ordering either of those...


I contacted Nick, with this number (83430-40020) he found the part Smile

They have it available in aus so im getting one thursday. Ill let you know how it goes
Back to top
View user's profile Send private message
DVS2JZ
'JZS147'


Joined: 12 Jun 2010
Posts: 862
Location: ManDurAH

PostPosted: Tue Apr 22, 2014 7:36 pm    Post subject: Reply with quote

If that fails


Tridon make one that fits and works, No part number off hand but should be able to cross reference something. most 90s toyota are the same
Back to top
View user's profile Send private message Send e-mail
prolancaster
JZS147 Member


Joined: 08 Jan 2013
Posts: 292
Location: Zillmere, Queensland. Brisbane

PostPosted: Tue Apr 22, 2014 8:48 pm    Post subject: Reply with quote

DVS2JZ wrote:
If that fails


Tridon make one that fits and works, No part number off hand but should be able to cross reference something. most 90s toyota are the same


Thanks! Ill definitely go with that if this one is no good
Back to top
View user's profile Send private message
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Wed Apr 23, 2014 12:02 pm    Post subject: Reply with quote

hmmm, interesting!

Well good news atleast! good luck! u manage to extract the remains of the old one yet
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
prolancaster
JZS147 Member


Joined: 08 Jan 2013
Posts: 292
Location: Zillmere, Queensland. Brisbane

PostPosted: Wed Apr 23, 2014 12:44 pm    Post subject: Reply with quote

Woggin wrote:
hmmm, interesting!

Well good news atleast! good luck! u manage to extract the remains of the old one yet


fingers crossed. I get the part tomorrow

havent bought an easy out bit yet. Going to grab one tomorrow while im at work and give it a go in the afternoon. Ill let you know how I get on
Back to top
View user's profile Send private message
prolancaster
JZS147 Member


Joined: 08 Jan 2013
Posts: 292
Location: Zillmere, Queensland. Brisbane

PostPosted: Mon Apr 28, 2014 7:42 pm    Post subject: Reply with quote

Woggin wrote:
hmmm, interesting!

Well good news atleast! good luck! u manage to extract the remains of the old one yet


The easy out bit just chewed the brass to pieces. So I bought a radiator hose water temp sensor adaptor from autobarn and put the sensor in there. After my final exams are over this week Ill drill out the old sensor, re tap the hole and seal it up with liquid metal epoxy and a bolt to fit. The easy out bit did a good job on making a mess of it hahaha. Took that elbow pipe piece that holds the sensor out today. Easy fix luckily
Back to top
View user's profile Send private message
Woggin
Site Moderator


Joined: 08 Sep 2009
Posts: 4244
Location: per SOR

PostPosted: Mon Apr 28, 2014 8:35 pm    Post subject: Reply with quote

that sucks!

u cant use a pick or something to get the remains out, or its proper fukd?
_________________
JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop
Back to top
View user's profile Send private message Send e-mail
prolancaster
JZS147 Member


Joined: 08 Jan 2013
Posts: 292
Location: Zillmere, Queensland. Brisbane

PostPosted: Mon Apr 28, 2014 9:15 pm    Post subject: Reply with quote

Woggin wrote:
that sucks!

u cant use a pick or something to get the remains out, or its proper fukd?


Its proper fucked hahaha. No big deal, its an easy fix. Ill upload a photo tomorrow
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    JZS147 Australia Forum Index -> Aristochat All times are GMT + 10 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum









Faq   |   Search   |   Memberlist   |   Usergroups   |   Register   |   Profile   |   Log in

Powered by phpBB Copyright © phpBB Group, 2005. All Rights Reserved

Hosted by Fluffyduck Internet Services - Supraforums.com.au Partner